流量校準(zhǔn)器Bios Defender 530-Low Flow    的詳細(xì)介紹流量校準(zhǔn)器Bios Defender 530-Low Flow 

Bios  Defender 530  Calibrator —— Coming January 2010

The Bios Defender 530，  with the ability to take both volumetric and standardized readings，  is the  latest addition to the popular Defender 510 and 520 line of Bios DryCal primary flow calibrators. Automatic correction of readings for temperature and pressure， rather than merely recording of ambient conditions， is essential for many applications. 

The Defender 530， like the other instruments in the line， provides users with a true primary flow calibrator for industrial hygiene， environmental and laboratory applications. The design offers low cost， light weight and ultra-compact size， incorporating the highly-regarded DryCal technology. It is small enough to fit easily into a slim briefcase for convenient transport.

Like all Bios calibrators， the Defender 530 is easy to use.  Turn it on. Connect it to a sampling pump. Start taking readings. It‘s as simple as that. Calibrations within a minute with no messy soap bubble solutions.

The Defender 510， 520 and 530 can take hands-free continuous readings while quickly and accurately setting the flow rate on air sampling pumps or other instruments. The Defender 510/520/530 calibrators connect to any PC and pre- and post-calibration data can be downloaded with the included Integrator 110 with the Optimizer Collect Light software. 

 

 

Bios Defender 530 Specifications

Size5.5"H x 6"W x 3"D
140 mm x 150 mm x 75 mmWeight29 oz. / 820 gFlow Ranges 
      DryCal Defender Low (L) Flow:5 to 500 ccm      DryCal  Defender Medium (M) Flow:50 - 5，000 ccm        DryCal Defender High (H) Flow:300 - 30，000 ccmAccuracy 
      Volumetric±1.0%      Standardized±1.2%User-Selectable Measurement Units      Volumetric FlowmL/min，  L/min， cc/min，  cf/min      Standarized FlowsmL/min， sL/min， scc/min， scf/min      PressuremmHg， PSI， kPa      TemperatureoC，  oFReadings        Approximate Time per Reading1-15 seconds      Reading StylesSingle (manual)， Continuous or Burst， with averaging function user-selectable from 1 to 100 measurementsGas CompatibilityUse with non-corrosive， non-condensing， non-combustible gases， less than 70% humidityFlow ModesSuction or PressureMeasurement Cell StyleIntegratedTemperature & Pressure SensorsIn the flow stream
Press: 3.5 mmHg (typical)， 7.0 mm (max)
Temp: 0.8 °C (typical) 1.3 °C (max)Battery System        AC Adapter/Charger12 DC， > 250 ma， 2.5 mm， center positive      Battery6V rechargeable， sealed lead-acid， 6-8 hours typical operation      Battery Operational Time  (5 cycles/min)， 3 hours backlight on， 8 hours backlight offPressure & Suction Fittings?” ID Hose BarbDisplayBacklit graphical LCDStorage Temperature0-70 °CAmbient Humidity0-70% -  non-condensingOperating Pressure  (Absolute)  15 PSIWarrantyInstrument: 1 year， Battery: 6 monthsData Port 
Serial RS-232  (for use with Optimizer Collect software)Data Cable1 meter (Defender Data Port to PC Serial Port)Protective CaseSoft side or Pelican cases availableLaboratory AccreditationBacked by ISO 17025 accreditation by NVLAP of NISTInstrument CertificationRoHS and CE Compliant
Bios Defender 500 Kits Include:  One flow c