ER-UP高精度型筒夾
"1)與標準ER夾持范圍相同
2)T.I.R.(徑向跳動誤差)≤5μm
3)用于需要良好T.I.R.的高速切削中
"
規(guī)格 可夾持刀具尺寸(mm)
ER8-UP 1/1.5/2/2.5/3/3.5/4/4.5/5
ER11-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7
ER16-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10
ER20-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13
ER25-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13/13.5/14/14.5/15/15.5/16/17
ER32-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13/13.5/14/14.5/15/15.5/16/17/17.5/18/18.5/19/19.5/20/21/22
ER40-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.512/12.5/13/13.5/14/14.5/15/15.5/16/17/17.5/18/18.5/19/19.5/20/20.5/2121.5/22/22.5/23/23.5/24/24.5/25/25.5/26/27/28/29/30
ER50-UP 6/8/10/12/14/16/18/20/22/24/25/26/28/30/32/34/36